That’s a great point that good bathroom lighting will eliminate shadows on your face in the mirror. That would be really nice because then you wouldn’t ever be frustrated about not being able to see parts of your face well. We are thinking of doing a bathroom remodel, and the lighting is the top priority on my list because our current lighting is quite dim.
Most en suite bathrooms are attached to the master bedroom, but there may be exceptions depending on the layout of your home. They are meant to be more private spaces than guest bathrooms, allowing you to put a more intimate or creative touch to this space. They are convenient due to their proximity to the bedroom, helping you maintain a comfortable amount of privacy.  Dating back to the 1960s, en suite bathrooms have become commonplace in the modern home. You can add simple or elegant upgrades to your en suite bathroom to make it a distinct selling feature. If you don’t currently have an en suite, you can add one by converting a large closet or building onto the bedroom.

Thanks for these remodeling tips. I didn’t know that it’s important to make sure that your new bathroom is ventilated properly especially if it can help prevent mildew buildup. I’m kind of interested to learn more about how to take this consideration into the initial planning of the project, and how to determine where the best location of the vent should be.


Before you decide how extensively to renovate, you need to know what your end goal is for your home. Are you renovating to raise the resale value of your home, or will you be staying put for years to come? Consider the condition of your neighborhood before you begin, and know which renovations are a good return on investment, and which will be considered overdoing it for the area. Having a specific plan in place for your future will help you decide how deep to go with your project. Plus: 11 Important Things to Do When Planning to Sell Your Home

One of the tricks that I’m always amazed by is the way he fills nail holes after installing trim.  Normally, you would pick up a wax filler stick from your hardware store in a similar color as your stain or paint color.  These are a bit pricey, especially since it’s just a stick of wax. Mr. Gracious’ method of filling nail holes is, in my opinion, brilliant and much more frugal.

Depending on the scale of your project, you might not need a full-on architectural commission, which involves extensive meetings, multiple job-site visits, and several sets of construction drawings, to the tune of about 8 percent of a project's construction budget. You might be able to tap an architect's design savvy by having him undertake a one-time design consultation. For example, for a $400 flat fee, Baton Rouge architect Kevin Harris will meet with a homeowner, examine the problem, and sketch out a few solutions that could be as simple as opening up a partition wall or moving a door. The homeowner can then give the sketch to a builder or take it to a drafting service, which will charge about $1 to $1.50 a square foot to crank out formal construction drawings.
If your addition calls for clapboard siding, for instance, you can save more in the long run by ponying up now for the preprimed and prepainted variety. It costs an extra 10 to 20 cents per foot, but "you'll wind up paying for half as many paint jobs down the road," says Paul Eldrenkamp, owner of Byggmeister, a design-build remodeling firm in Newton, Massachusetts. The reason? Factory finishes are applied on dry wood under controlled conditions—no rain, no harsh sun. "I used prefinished claps on my house about ten years ago and the only flaw in the finish is the occasional mildew spot, easily washed off," Eldrenkamp says. "The paint looks as if it'll be good for another ten years, easily."
×